9 May 2012 Development of fiber optic ferrule-top cantilevers for sensing and beam-steering applications
Author Affiliations +
Ferrule-top (FT) cantilevers are a new generation of all optical micromechanical sensors obtained by carving microstructures on the top of ferrule terminated fibers. In this paper, we will demonstrate how this plug and play design can be used for the development of a new generation of sensors and actuators for harsh environments, where commercially available devices would be prone to failure. Ferrule-top sensors can work in two main modes - static and dynamic. The static mode is based on recording elastic deflection of the cantilever; the dynamic mode relies on tracking changes in its mechanical properties (resonance frequency, quality factor). Depending on the application, one can choose which mode is most suitable or combine both to achieve best performance. We will illustrate the relation between specific measured quantity (humidity, flow) and the behavior of the sensor. Further, we will show the setup in which the sensor can be actuated using light, giving the possibility to excite the cantilever without any electronics on the sensing head. This technique might by use for the development of fully optical beamsteering microdevices.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Gruca, G. Gruca, D. Chavan, D. Chavan, A. Cipullo, A. Cipullo, K. Babaei Gavan, K. Babaei Gavan, F. De Filippis, F. De Filippis, A. Minardo, A. Minardo, J. Rector, J. Rector, K. Heek, K. Heek, L. Zeni, L. Zeni, D. Iannuzzi, D. Iannuzzi, } "Development of fiber optic ferrule-top cantilevers for sensing and beam-steering applications", Proc. SPIE 8439, Optical Sensing and Detection II, 84390E (9 May 2012); doi: 10.1117/12.922057; https://doi.org/10.1117/12.922057


Process monitoring and control with fiber optics
Proceedings of SPIE (February 28 1991)
Embeddable Interferometric Strain Sensor For Active Damping
Proceedings of SPIE (February 04 1990)
Fast-responsive optical fiber relative-humidity sensor
Proceedings of SPIE (February 13 2002)
Fiber optical liquid level sensor under cryogenic environment
Proceedings of SPIE (February 28 2001)
High-pressure fiber optic acoustic sensor
Proceedings of SPIE (December 13 2004)

Back to Top