17 September 2012 The 3,6 m Indo-Belgian Devasthal Optical Telescope: general description
Author Affiliations +
AMOS SA has been awarded of the contract for the design, manufacturing, assembly, tests and on site installation (Devasthal, Nainital in central Himalayan region) of the 3.6 m Indo-Belgian Devasthal Optical Telescope (IDOT). The telescope has Ritchey-Chrétien optical configuration with one axial and two side Cassegrain ports. The meniscus primary mirror is active and it is supported by pneumatic actuators. The azimuth axis system is equipped with hydrostatic bearing. The telescope was completely assembled and tested in AMOS workshop. This step is completed and successful. The telescope is now ready for shipment to Nainital. This paper describes the telescope and summarizes the test results performed at AMOS to demonstrate that the telescope satisfies the main system requirements.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nathalie Ninane, Nathalie Ninane, Carlo Flebus, Carlo Flebus, Brijesh Kumar, Brijesh Kumar, } "The 3,6 m Indo-Belgian Devasthal Optical Telescope: general description", Proc. SPIE 8444, Ground-based and Airborne Telescopes IV, 84441V (17 September 2012); doi: 10.1117/12.925921; https://doi.org/10.1117/12.925921


DAG 4m telescope: assembly, integration and testing
Proceedings of SPIE (July 06 2018)
Adaptive optics for the European very large telescope
Proceedings of SPIE (December 01 1991)
Research of active optics force actuator based on voice coil...
Proceedings of SPIE (September 13 2012)
Active Optics - Don't Build A Telescope Without It!
Proceedings of SPIE (November 04 1982)
Innovative approach to next-generation telescope design
Proceedings of SPIE (July 01 1990)
The 3,6 m Indo Belgian Devasthal Optical Telescope assembly,...
Proceedings of SPIE (September 17 2012)
Active optics experiments with a 62-cm thin mirror
Proceedings of SPIE (July 01 1990)

Back to Top