17 September 2012 Quasi-static wavefront control for the Advanced Technology Solar Telescope
Author Affiliations +
Abstract
The Advanced Technology Solar Telescope (ATST) requires active control of quasi-static telescope aberrations in order to meet image quality standards set by its science requirements. Wavefront control is managed by the Telescope Control System, with many telescope subsystems playing key roles. We present the design of the ATST quasi-static wavefront and alignment control architecture and the algorithms used to control its four active mirrors. Two control algorithms are presented, one that minimizes force on M1 actuators and another that employs a neutral-pointing constraint on M2 to reduce pointing error. We also present simulations that generate typical daily active mirror trajectories which correct optical misalignments due to changing gravitational and thermal loads.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Luke C. Johnson, Luke C. Johnson, R. Upton, R. Upton, T. Rimmele, T. Rimmele, S. Barden, S. Barden, } "Quasi-static wavefront control for the Advanced Technology Solar Telescope", Proc. SPIE 8444, Ground-based and Airborne Telescopes IV, 84443O (17 September 2012); doi: 10.1117/12.926624; https://doi.org/10.1117/12.926624
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Overview of the LSST active optics system
Proceedings of SPIE (August 04 2014)
Adaptive optics for the European very large telescope
Proceedings of SPIE (December 01 1991)
The eye of the beholder: designing the OWL
Proceedings of SPIE (January 30 2003)
WIYN telescope active optics system
Proceedings of SPIE (June 08 1995)
Innovative approach to next-generation telescope design
Proceedings of SPIE (July 01 1990)

Back to Top