24 September 2012 STELES mechanical design
Author Affiliations +
Abstract
The SOAR Telescope Echelle Spectrograph - STELES - is part of the Brazilian participation on the 4.1m SOAR telescope second-generation instrumentation. In view of SOAR´s high image quality and moderately large collecting area and the near UV capability, it will be able to yield high quality spectroscopic data for a large variety of objects of astrophysical interests. The spectrograph is a R4 cross-dispersed echelle fed by the SOAR Nasmyth focus, operating in a quasi-Littrow white pupil configuration, and a resolving power of R ≈ 50,000, covering the 300-900nm spectral range in one shot. STELES is a bench spectrograph which will be mounted vertically on one side of the SOAR Telescope fork. The ninetydegree inversion of the mechanical components, due to the vertical position of the instrument, plus the close proximity of most components, due to the spectrograph compactness, were requirements carefully observed during the mechanical design process. This paper describes the mechanical characteristics of the individual assemblies that make up the STELES mechanical design. The STELES instrument can be separated into two sections, the fore optics, and the spectrograph. The fore optics has the mechanisms from the SOAR telescope down to the STELES bench spectrograph, and the bench spectrograph has the mechanisms for the spectrograph covering the red and blue spectrum.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ruben Dominguez, Ruben Dominguez, Vanessa B. P. Macanhan, Vanessa B. P. Macanhan, Bruno V. Castilho, Bruno V. Castilho, Marcio V. de Arruda, Marcio V. de Arruda, Clemens D. Gneiding, Clemens D. Gneiding, Andreas Klossek, Andreas Klossek, Ney Diniz, Ney Diniz, Diego E. Mercadal, Diego E. Mercadal, Denis Cariello, Denis Cariello, Sascha Voegel, Sascha Voegel, Beatrice Nehrkorn, Beatrice Nehrkorn, Fernando Lourenço, Fernando Lourenço, } "STELES mechanical design", Proc. SPIE 8446, Ground-based and Airborne Instrumentation for Astronomy IV, 844632 (24 September 2012); doi: 10.1117/12.926903; https://doi.org/10.1117/12.926903
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT

The optical design of the X-shooter for the VLT
Proceedings of SPIE (June 29 2006)
Optical design of a versatile FIRST high resolution near IR...
Proceedings of SPIE (September 23 2012)
The MagE spectrograph
Proceedings of SPIE (July 10 2008)
A Canadian wide field optical spectrograph for a 30 m...
Proceedings of SPIE (September 29 2004)
Holographic Microscopy
Proceedings of SPIE (June 11 1985)

Back to Top