10 October 2012 Laser lift-off of GaN thin film and its application to the flexible light emitting diodes
Author Affiliations +
The high performance GaN light emitting diode (LED) from sapphire wafer has been transferred on a plastic substrate with 308nm XeCl laser lift-off (LLO) for next generation flexible lighting applications. SU-8 passivation with thermal release tape (TRT) adhesive enables structure coverage and adhesion so that it can be an excellent candidate for a carrier substrate for non-wetting transfer process using laser liftoff technology. The dimensions of the laser beam are also investigated in two types (3μm x 5cm and 1.2mm x 1.2mm) to reduce stress when decomposition of GaN occurs. With careful optimization of carrier substrate and laser beam conditions, we can fabricate flexible GaN LED on polyimide substrates which shows similar electrical properties to the GaN LED on bulk sapphire substrate.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seung Hyun Lee, Seung Hyun Lee, So Young Park, So Young Park, Keon Jae Lee, Keon Jae Lee, } "Laser lift-off of GaN thin film and its application to the flexible light emitting diodes", Proc. SPIE 8460, Biosensing and Nanomedicine V, 846011 (10 October 2012); doi: 10.1117/12.964095; https://doi.org/10.1117/12.964095


Progress and challenges in GaN-on-Si LEDs
Proceedings of SPIE (March 07 2016)
InGaN-based flexible light emitting diodes
Proceedings of SPIE (February 15 2017)
8 inch GaN on Si based wafer level chip scale...
Proceedings of SPIE (January 01 1900)
Lasers in the manufacturing of LEDs
Proceedings of SPIE (February 17 2010)

Back to Top