Fly-cutting and testing of freeform optics with sub-um shape deviations

Ralf Steinkopf; Sebastian Scheiding; Andreas Gebhardt; Stefan Risse; Ramona Eberhardt; Andreas Tünnermann

doi:10.1117/12.928963

11 October 2012 Fly-cutting and testing of freeform optics with sub-μm shape deviations

Ralf Steinkopf, Sebastian Scheiding, Andreas Gebhardt, Stefan Risse, Ramona Eberhardt, Andreas Tünnermann

Proceedings Volume 8486, Current Developments in Lens Design and Optical Engineering XIII; 84860K (2012) https://doi.org/10.1117/12.928963
Event: SPIE Optical Engineering + Applications, 2012, San Diego, California, United States

Abstract

Optical designs in various applications profit from the increasing use of freeform elements. However, freeform optics always challenges the manufacturing process. The complexity of the fabrication derives from the missing symmetry in freeform surfaces. Ultra-precision machining is an appropriate method to realize complex optical freeforms. Surface deviations can be reduced in a deterministic process by a test and correction loop to achieve shapes with sub-μm deviations. But freeform elements do not only require the optical performance, they also depend on tight tolerances of the surface position with respect to reference structures. Due to the absence of rotation symmetry in freeform elements, all six degrees of freedom have to be constrained. Diamond machining allows to machine reference structures on the optical part. They can be used for alignment while testing or during the assembly processes. This paper shows a deterministic approach to manufacture optical freeform surfaces with sub-μm surface deviations by fly-cut-machining and servo assisted diamond turning. Reference structures are included at the edge of the element in order to support the following measurement and assembly processes. The reference structures are manufactured within the machining process of the optical surface. This procedure ensures tight tolerances between reference structures and optical surface /1/. The complex optical surface is measured with respect to the references with the tactile measurement system UA3P. The reference structures are used to locate the coordinate system of the element and hence to constrain the alignment parameter. After fitting the data, a revised tool-path is used to improve the shape deviation to sub-μm accuracies.

Citation Download Citation

Ralf Steinkopf, Sebastian Scheiding, Andreas Gebhardt, Stefan Risse, Ramona Eberhardt, and Andreas Tünnermann "Fly-cutting and testing of freeform optics with sub-μm shape deviations", Proc. SPIE 8486, Current Developments in Lens Design and Optical Engineering XIII, 84860K (11 October 2012); https://doi.org/10.1117/12.928963

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available