Paper
24 October 2012 Solution based Al/PbS and Ti-Au/PbS Schottky photodiodes for SWIR detection
Author Affiliations +
Abstract
In this work, PbS colloidal quantum dot based photodiodes are realized that is compatible for integration to read out electronics. Schottky photodiode topology is selected to implement PbS quantum dots as photodetector because of its fast response and moderate sensitivity. The device is formed from Indium tin oxide (ITO) anode, the photosensitive PbS layer and a schottky contact formed of both aluminum or titanium and gold stack. Ligand exchange processes optimized in order to replace long capping ligands of PbS QDs with shorter ones. Layer by layer deposition method is applied to form pinhole free PbS CQD films. For Al/PbS samples rectification ratios greater than 100 is achieved for ±2 V bias voltages. At 2V reverse bias and under 5mW/cm2 illumination, 0.195 A/W responsivity and 8.19 x 1010 Jones normalized detectivity is achieved. For Ti-Au/PbS samples, rectification ratio greater than 250 is achieved for ±2 V bias voltages. At 3V reverse bias, 0.667 A/W responsivity, 53.3 % quantum efficiency and 2,12 x 1010 Jones normalized detectivity is achieved.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emre Heves and Yasar Gurbuz "Solution based Al/PbS and Ti-Au/PbS Schottky photodiodes for SWIR detection", Proc. SPIE 8541, Electro-Optical and Infrared Systems: Technology and Applications IX, 85411M (24 October 2012); https://doi.org/10.1117/12.979806
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lead

Photodiodes

Diodes

Aluminum

Glasses

Quantum dots

Gold

RELATED CONTENT


Back to Top