Paper
29 November 2012 A novel four-section DBR tunable laser with dual-wavelength lasing
Author Affiliations +
Abstract
A novel mode-beating DBR laser with dual-mode lasing is fabricated. The DBR laser has four parts, a front gain section, a phase section, a DBR grating section, and a rear gain section. When the current of the front gain section is above the threshold, the device is working in single-mode. Dual-mode lasing can be obtained by adjusting the current of the rear gain section. The power difference between the two modes can be less than 1 dB. An optical down-conversion technique was used to measure the beating frequency. The mode-beating frequency of the two modes is about 93 GHz, and the 3- dB linewidth of the mode-beating RF spectrum of the laser when free-running is about 5 MHz. Moreover, the wavelength of the dual-mode can be tuned synchronously when the current injected into the DBR grating section is adjusted. The wavelength tuning range of the device is at least 3 nm.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liqiang Yu, Lingjuan Zhao, Dan Lu, Yan Li, JiaoQing Pan, HongLiang Zhu, and Wei Wang "A novel four-section DBR tunable laser with dual-wavelength lasing", Proc. SPIE 8552, Semiconductor Lasers and Applications V, 85520T (29 November 2012); https://doi.org/10.1117/12.999440
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Clocks

Tunable lasers

Spectrum analysis

Wavelength tuning

Distributed Bragg reflectors

Metalorganic chemical vapor deposition

Back to Top