27 November 2012 Design of freeform LED lens with large light deflection angle for road lighting application
Author Affiliations +
The deflection of light of a single optical surface is limited by the Fresnel reflection loss and it is usually not enough to meet the requirements in large road width, tilt lighting LED lens design. This paper presents a method which greatly increases the light deflection angle of LED lens by combining a tilting aspherical surface with a freeform surface. Using this design method, a road lighting LED lens for length L= 30m, road width W=12m and tilt angle θ = 15 ° is designed and manufactured. The experimental results show that the overall road luminance uniformity is as high as 0.7. This design method greatly expand the light distributing capacity of the free-form surface LED lens, and it can be widely used in the design of LED road lighting lens and other illumination applications where large light deflection angle is needed.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shaoyun Yin, Zhongxun Wang, Xiuhui Sun, Liangping Xia, Hui Pang, Qiling Deng, Chunlei Du, "Design of freeform LED lens with large light deflection angle for road lighting application", Proc. SPIE 8560, LED and Display Technologies II, 85600E (27 November 2012); doi: 10.1117/12.999767; https://doi.org/10.1117/12.999767


A novel optimization strategy for LED street lamp designing
Proceedings of SPIE (December 31 2013)
LED luminaire longevity strategy models comparison
Proceedings of SPIE (August 18 2010)
Freeform reflector design for LED street lighting
Proceedings of SPIE (September 23 2011)
Lens design of street lamp for integrated high-power LED
Proceedings of SPIE (November 05 2010)
Non-axisymmetrical freeform design for short LED street lamp
Proceedings of SPIE (September 22 2011)

Back to Top