20 March 2013 Optical fibers for 355nm pulsed lasers and high-power broadband light sources
Author Affiliations +
In the past, the spectral stability of multimode UV-fibers has been mainly characterized using deuterium lamps with a broadband spectrum in the DUV. In meantime, new UV light-sources with higher powers are available. For example, improved pulsed Nd:YAG lasers with higher harmonics or high-power broadband plasma lamps are interesting candidates for new systems and applications. Because of better beam quality, multimode all-silica fibers with core diameter smaller than 100 μm can be recommended. A new step-index fiber with a large cladding-to-core ratio will be introduced. Using the new light-sources, the degradation during UV-light delivery will be described in detail, comparing the hydrogen-loaded and non-loaded version of this fiber. These results of UV-induced damage will be compared to a commercially available improved 100 μm UV-fiber damaged with deuterium lamp.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jan Heimann, Jan Heimann, Karl-Friedrich Klein, Karl-Friedrich Klein, Cornell P. Gonschior, Cornell P. Gonschior, Moritz Klein, Moritz Klein, Georg Hillrichs, Georg Hillrichs, } "Optical fibers for 355nm pulsed lasers and high-power broadband light sources", Proc. SPIE 8576, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XIII, 85760K (20 March 2013); doi: 10.1117/12.2005146; https://doi.org/10.1117/12.2005146


Improvement of optical damage in specialty fiber at 266 nm...
Proceedings of SPIE (February 19 2014)
N2 laser stereo-lithography
Proceedings of SPIE (November 05 2000)
Advantages Of Using Thin Fibers
Proceedings of SPIE (June 20 1988)
Fiber-guided tunable UV-laserlight system around 215 nm
Proceedings of SPIE (April 17 1997)

Back to Top