4 March 2013 Deconvolution algorithms for photoacoustic tomography to reduce blurring caused by finite sized detectors
Author Affiliations +
Abstract
Most reconstruction algorithms for photoacoustic tomography, like back-projection or time-reversal, work ideally for point-like detectors. For real detectors, which integrate the pressure over their finite size, it was shown that images reconstructed by back-projection or time-reversal show some blurring. Iterative reconstruction algorithms using an imaging matrix can take the finite size of real detectors directly into account, but the numerical effort is significantly higher compared to the use of direct algorithms. For spherical or cylindrical detection surfaces the blurring caused by a finite detector size is proportional to the distance from the rotation center (“spin blur”) and is equal to the detector size at the detection surface. In this work we use deconvolution algorithms to reduce this type of blurring on simulated and on experimental data. Experimental data were obtained on a plastisol cylinder with 6 thin holes filled with an absorbing liquid (OrangeG). The holes were located on a spiral emanating from the center of the cylinder. Data acquisition was done by utilization of a piezoelectric detector which was rotated around the plastisol cylinder.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Burgholzer, Peter Burgholzer, Heinz Roitner, Heinz Roitner, Thomas Berer, Thomas Berer, Hubert Grün, Hubert Grün, D. P. O'Leary, D. P. O'Leary, R. Nuster, R. Nuster, G. Paltauf, G. Paltauf, M. Haltmeier, M. Haltmeier, } "Deconvolution algorithms for photoacoustic tomography to reduce blurring caused by finite sized detectors", Proc. SPIE 8581, Photons Plus Ultrasound: Imaging and Sensing 2013, 858137 (4 March 2013); doi: 10.1117/12.2003889; https://doi.org/10.1117/12.2003889
PROCEEDINGS
11 PAGES


SHARE
Back to Top