26 February 2013 System technology for laser-assisted milling with tool integrated optics
Author Affiliations +
Abstract
High strength metal alloys and ceramics offer a huge potential for increased efficiency (e. g. in engine components for aerospace or components for gas turbines). However, mass application is still hampered by cost- and time-consuming end-machining due to long processing times and high tool wear. Laser-induced heating shortly before machining can reduce the material strength and improve machinability significantly. The Fraunhofer IPT has developed and successfully realized a new approach for laser-assisted milling with spindle and tool integrated, co-rotating optics. The novel optical system inside the tool consists of one deflection prism to position the laser spot in front of the cutting insert and one focusing lens. Using a fiber laser with high beam quality the laser spot diameter can be precisely adjusted to the chip size. A high dynamic adaption of the laser power signal according to the engagement condition of the cutting tool was realized in order not to irradiate already machined work piece material. During the tool engagement the laser power is controlled in proportion to the current material removal rate, which has to be calculated continuously. The needed geometric values are generated by a CAD/CAM program and converted into a laser power signal by a real-time controller. The developed milling tool with integrated optics and the algorithm for laser power control enable a multi-axis laser-assisted machining of complex parts.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jan-Patrick Hermani, Jan-Patrick Hermani, Michael Emonts, Michael Emonts, Christian Brecher, Christian Brecher, } "System technology for laser-assisted milling with tool integrated optics", Proc. SPIE 8601, Fiber Lasers X: Technology, Systems, and Applications, 860125 (26 February 2013); doi: 10.1117/12.2001992; https://doi.org/10.1117/12.2001992
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top