29 March 2013 High resolution laser patterning of ITO on PET substrate
Author Affiliations +
Abstract
Cost-effective laser patterning of indium tin oxide (ITO) thin film coated on flexible polyethylene terephthalate (PET) film substrate for touch panel was studied. The target scribing width was set to the order of 10 μm in order to examine issues involved with higher feature resolution. Picosecond-pulsed laser and Q-switched nanosecond-pulsed laser at the wavelength of 532nm were applied for the comparison of laser patterning in picosecond and nanosecond regimes. While relatively superior scribing quality was achieved by picosecond laser, 532 nm wavelength showed a limitation due to weaker absorption in ITO film. In order to seek for cost-effective solution for high resolution ITO scribing, nanosecond laser pulses were applied and performance of 532nm and 1064nm wavelengths were compared. 1064nm wavelength shows relatively better scribing quality due to the higher absorption ratio in ITO film, yet at noticeable substrate damage. Through single pulse based scribing experiments, we inspected that reduced pulse overlapping is preferred in order to minimize the substrate damage during line patterning.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tao Zhang, Tao Zhang, Di Liu, Di Liu, Hee K. Park, Hee K. Park, Dong X. Yu, Dong X. Yu, David J. Hwang, David J. Hwang, } "High resolution laser patterning of ITO on PET substrate", Proc. SPIE 8607, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVIII, 860712 (29 March 2013); doi: 10.1117/12.2004122; https://doi.org/10.1117/12.2004122
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top