14 March 2013 FBG pressure sensor of high pressure electric oil pumps for prestressing
Author Affiliations +
Abstract
Prestressed concrete structure is getting more and more extensive application in architecture, hydraulic engineering and traffic engineering because of its significant advantages of crack later or not cracks completely. It is an internal stress concrete structure that a certain force relies on prestressing tendons. The effectivity of the prestressing tendon in concrete structure is directly related to the reliability, applicability and viability of the whole concrete structure. So it is a key program to apply accurate prestress to the prestressing tendon. According to the pressure sensing principle of the fiber Bragg grating (FBG), a circular plate diaphragm-based FBG sensor for high pressure electric oil pumps that is the pressure source device of the prestressed concrete structure was presented. To overcome the cross sensitivity of temperature and pressure, two FBGs were integrated in the sensor, one of the FBGs isolated from the pressure is used as temperature compensation grating, it is called temperature-FBG comparing to another FBG called pressure-FBG. The elastic diaphragm was chosen as the pressure sensing element whose distortion displace is proportional to the difference of the two sides’ pressure of the diaphragm. A certain stress is applied to the pressure-FBG which is stuck to the center of the diaphragm, and then the reflection wavelength of the pressure-FBG is inverse proportional to load of the diaphragm. The results indicated that the linearity is up to 99.99%, and the pressure sensitivity coefficient is 0.024nm/MPa within the measurement scope of 0-70MPa.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhenwu Guo, Guangwei Liu, Qingbin Meng, Fuwei Ge, Weixiang Li, "FBG pressure sensor of high pressure electric oil pumps for prestressing", Proc. SPIE 8619, Physics and Simulation of Optoelectronic Devices XXI, 86191S (14 March 2013); doi: 10.1117/12.2003360; https://doi.org/10.1117/12.2003360
PROCEEDINGS
7 PAGES


SHARE
Back to Top