12 March 2013 A method of reducing number of pixels on display device for super-multiview display
Author Affiliations +
Abstract
Super multi-view display provides smooth motion parallax without special glasses, and it is expected that the observer is free from the visual fatigue caused by the accommodation-vergence conflict. However, there is a problem that a huge number of pixels are required on a display device such as liquid crystal display panel because high-density rays are required for good quality images and each ray needs corresponding pixel. In this paper, we propose a new three-dimensional display based on lenticular method to reduce the required number of pixels. The rays are shot out to only around observer’s pupils. To do this, the lenticular lens of which viewing zone angle is narrowed is used and the lenticular lens is illuminated by parallel light made by cylindrical lenses and LEDs to suppress sidelobes. The direction of the parallel light is changed to follow the observer’s eye. We designed the optics system and confirmed the availability of the proposed method by computer simulation. Moreover, we constructed a prototype display and demonstrated. As a result, the parallax pitch and the viewing zone nearly equaled to designed values when the display was observed from the front, but these values were increased with the increasing viewing angle. The result of analysis, the reason why the parallax pitch and the viewing zone were expanded is thought as the curvature of field of the lenticular lens.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuki Adachi, Tomohiro Yendo, "A method of reducing number of pixels on display device for super-multiview display", Proc. SPIE 8648, Stereoscopic Displays and Applications XXIV, 86481Q (12 March 2013); doi: 10.1117/12.2003660; https://doi.org/10.1117/12.2003660
PROCEEDINGS
11 PAGES


SHARE
Back to Top