12 March 2013 Stereoscopic display gray to gray crosstalk measurement
Author Affiliations +
There are several studies on estimating crosstalk of 3D displays. Crosstalk is an important factor in determining image quality of stereoscopic display. In previous study, gray to gray crosstalk model has been modified. In this paper, we use six commercial stereoscopic displays including passive polarized glasses and active shutter glasses, both left and right eyes were measured by a luminance meter to verify the gray to gray crosstalk model and analyze the stability of the measurement data using our standard operating procedure (SOP). According to the SOP, we use simple statistical method to verify the repeatability of data. Experimental results indicate that our measurement system can be used to estimate the value of gray to gray crosstalk of stereoscopic display, the uncertainty below 0.8% for FPR display and 3% for shutter glasses display at 95% confidence level. These results, can be used as an important parameters in stereoscopic display visual quality, also can be used as a design feedback for engineer.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi-Heng Chou, Yi-Heng Chou, Fu-Hao Chen, Fu-Hao Chen, Kuo-Chung Huang, Kuo-Chung Huang, Kuen Lee, Kuen Lee, Ching-Chiu Liao, Ching-Chiu Liao, Yi-hen Chen, Yi-hen Chen, } "Stereoscopic display gray to gray crosstalk measurement", Proc. SPIE 8648, Stereoscopic Displays and Applications XXIV, 864820 (12 March 2013); doi: 10.1117/12.2006000; https://doi.org/10.1117/12.2006000

Back to Top