You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
30 January 2013Three dimensional model of melting and crystallization kinetics during laser cladding process
Unsteady heat transfer with simultaneous melting and crystallization at laser cladding process
with coaxial metal powder injection is investigated numerically. Numerical modeling determined
that the main parameters that govern melt pool dynamics and system maximum temperature are
mass feed rate, laser power and scanning speed. Also it is determined that taking in to account the
kinetics of phase change results in melt pool boundary and melting temperature mismatch.
Dimensions of melted zone and cladding height are compared with experimental data.
The alert did not successfully save. Please try again later.
F. Kh. Mirzade, M. D. Khomenko, V. G. Niziev, R. V. Grishaev, V. Ya. Panchenko, "Three dimensional model of melting and crystallization kinetics during laser cladding process," Proc. SPIE 8677, XIX International Symposium on High-Power Laser Systems and Applications 2012, 86770R (30 January 2013); https://doi.org/10.1117/12.2010024