10 April 2013 Toward 7nm target on product overlay for C028 FDSOI technology
Author Affiliations +
Abstract
The continuous need for lithography overlay performance improvement is a key point for advanced integrated circuit manufacturing. Overlay control is more and more challenging in the 2x nm process nodes regarding functionality margin of the chip and tool capability. Transistor architecture rules which are set, confirm poly to contact space as the most critical one for 28nm technology node. Critical Dimension variability of these layers, even with best in class process stability, in addition to design constraint lead to on product overlay specifications of around 7nm. In order to ensure that the target is met in production environment and to identify potential ways for improvement, identification of the contributors to overlay errors is essential. We have introduced a novel budget breakdown methodology using both bottom-up and top-down overlay data. For the bottom up part, we have performed extensive testing with very high sampling scheme so as to quantify the main effects. In-line overlay metrology data has been used for top down approach to verify the overall performance in production. In this paper we focused on the 28nm contact to gate overlay in a FDSOI process. The initial inconsistency between bottom up and top down results led us to further exploration of the root cause of these inconsistencies. We have been able to highlight key figures to focus on, like reticle heating, wafer table contamination and etch processing effects. Finally, we conclude on 7nm overlay target achievement feasibility in high volume manufacturing environment.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Maxime Gatefait, Maxime Gatefait, Bertrand Le-Gratiet, Bertrand Le-Gratiet, Pierre Jerome Goirand, Pierre Jerome Goirand, Auguste Lam, Auguste Lam, Richard Van Haren, Richard Van Haren, Anne Pastol, Anne Pastol, Maya Doytcheva, Maya Doytcheva, Xing Lan Liu, Xing Lan Liu, Jan Beltman, Jan Beltman, } "Toward 7nm target on product overlay for C028 FDSOI technology", Proc. SPIE 8681, Metrology, Inspection, and Process Control for Microlithography XXVII, 868105 (10 April 2013); doi: 10.1117/12.2011099; https://doi.org/10.1117/12.2011099
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

In field overlay uncertainty contributors
Proceedings of SPIE (May 09 2005)
Double patterning for 32nm and below: an update
Proceedings of SPIE (March 17 2008)
Methodology for overlay mark selection
Proceedings of SPIE (April 20 2011)

Back to Top