10 April 2013 Increased particle inspection sensitivity by reduction of background scatter variance
Author Affiliations +
Abstract
In dark-field particle inspection, the limiting factor for sensitivity is the amount of background scatter due to substrate roughness. This scatter forms a speckle pattern and shows an intensity distribution with a long tail. To reduce falsepositives to an acceptable level, a high detection threshold should be chosen such that the tail of the background distribution is avoided. We have modeled an optimized illumination mode, that reduces the variance in the background distribution. This illumination mode illuminates the substrate from multiple azimuth angles. We show that the speckle patterns generated by each azimuth angle can be independent from each other. Therefore by combining the angles, the variance of the background signal is reduced. We show that for the parameters of our inspection system the detection threshold can be reduced by a factor three, resulting in a lower detection limit that is 20% smaller in particle size. The change in the background scattering distribution was confirmed by experiments.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter van der Walle, Peter van der Walle, Pragati Kumar, Pragati Kumar, Dmitry Ityaksov, Dmitry Ityaksov, Richard Versluis, Richard Versluis, Diederik J. Maas, Diederik J. Maas, Olaf Kievit, Olaf Kievit, Jochem Janssen, Jochem Janssen, Jacques C. J. van der Donck, Jacques C. J. van der Donck, } "Increased particle inspection sensitivity by reduction of background scatter variance", Proc. SPIE 8681, Metrology, Inspection, and Process Control for Microlithography XXVII, 868116 (10 April 2013); doi: 10.1117/12.2011092; https://doi.org/10.1117/12.2011092
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT


Back to Top