9 April 2013 Conformal printing of sensors on 3D and flexible surfaces using aerosol jet deposition
Author Affiliations +
Abstract
Emerging applications for sensing and monitoring technology can no longer rely entirely on conventional sensor configurations, particularly where planar, rigid, and often fragile devices cannot meet demanding system sensing requirements. Direct-write Aerosol Jet (AJ) printing is establishing itself as an enabling technology for fabrication of sensors and circuit components on three dimensional, flexible surfaces for applications ranging from structural health monitoring to human factors and performance measurement. Examples will describe the versatility of AJ printing as a viable method for creating sensors that are conformally matched to the surface topology of a wide variety of substrates.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tyler Blumenthal, Tyler Blumenthal, Vincent Fratello, Vincent Fratello, Giovanni Nino, Giovanni Nino, Keith Ritala, Keith Ritala, } "Conformal printing of sensors on 3D and flexible surfaces using aerosol jet deposition", Proc. SPIE 8691, Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2013, 86910P (9 April 2013); doi: 10.1117/12.2009278; https://doi.org/10.1117/12.2009278
PROCEEDINGS
9 PAGES


SHARE
Back to Top