9 April 2013 Particle based conductive silver ink customized for ink jet printing on cellulose electro-active paper
Author Affiliations +
Abstract
A previously synthesized silver nanoparticle based conductive silver ink was used in this work to print conductive electrodes on cellulose electro-active paper (EAPap) by using an inkjet printer. Then, Inkjet printed cellulose EAPap experienced a post-deposition heat treatment-sintering process to enhance electrical conductivity of printed electrodes by converting those printed patterns into continuous metallic state. The dependences of electrical bulk resistivity of printed electrodes on both sintering temperature and sintering time were checked. It was found that, higher sintering temperatures and longer sintering process result lower resistivity. In addition, the uniformity of the thicknesses of printed electrodes through transverse direction and the relationship between thickness and the number of printing also had been analyzed. Those printed electrodes also showed very good adhesion on cellulose EAPap.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mohammad Abu Hasan Khondoker, Mohammad Abu Hasan Khondoker, Seong Cheol Mun, Seong Cheol Mun, Jaehwan Kim, Jaehwan Kim, } "Particle based conductive silver ink customized for ink jet printing on cellulose electro-active paper", Proc. SPIE 8691, Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2013, 86910Q (9 April 2013); doi: 10.1117/12.2010095; https://doi.org/10.1117/12.2010095
PROCEEDINGS
4 PAGES


SHARE
Back to Top