17 April 2013 High temperatures health monitoring of the condensed water height in steam pipe systems
Author Affiliations +
Abstract
Ultrasonic probes were designed, fabricated and tested for high temperature health monitoring system. The goal of this work was to develop the health monitoring system that can determine the height level of the condensed water through the pipe wall at high temperature up to 250 °C while accounting for the effects of surface perturbation. Among different ultrasonic probe designs, 2.25 MHz probes with air backed configuration provide satisfactory results in terms of sensitivity, receiving reflections from the target through the pipe wall. A series of tests were performed using the airbacked probes under irregular conditions, such as surface perturbation and surface disturbance at elevated temperature, to qualify the developed ultrasonic system. The results demonstrate that the fabricated air-backed probes combined with advanced signal processing techniques offer the capability of health monitoring of steam pipe under various operating conditions.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hyeong Jae Lee, Hyeong Jae Lee, Yoseph Bar-Cohen, Yoseph Bar-Cohen, Shyh-Shiuh Lih, Shyh-Shiuh Lih, Mircea Badescu, Mircea Badescu, Xiaoqi Bao, Xiaoqi Bao, Stewart Sherrit, Stewart Sherrit, Nobuyuki Takano, Nobuyuki Takano, Patrick Ostlund, Patrick Ostlund, Julian Blosiu, Julian Blosiu, } "High temperatures health monitoring of the condensed water height in steam pipe systems", Proc. SPIE 8695, Health Monitoring of Structural and Biological Systems 2013, 869514 (17 April 2013); doi: 10.1117/12.2009240; https://doi.org/10.1117/12.2009240
PROCEEDINGS
10 PAGES


SHARE
Back to Top