17 April 2013 Design, fabrication, and test of a small aperture, dual frequency ultrasound transducer
Author Affiliations +
Abstract
High resolution ultrasound medical imaging requires high frequency transducers, which usually are known with decreased penetration depth because of high loss in two-way-loop at high frequencies. To obtain high resolution imaging at large depth, a dual frequency transducer was designed for contrast imaging. Specifically, a 35 MHz receiving transducer with aperture of 0.6 mm x 0.6 mm was integrated into a 6.5 MHz transmitting transducer with aperture of 0.6 mm x 3 mm. High pressure ultrasound at low frequency was generated by the transducer to excited microbubbles in tissue. High frequency component of the nonlinear response from microbubbles were received by the 35 MHz transducer for high resolution imaging at a relatively large depth. The prototyped transducer showed the ability of transmitting about 2 MPa pressure at 6.5 MHz, under an input of 5-cycle burst at 250 Vpp, which is high enough to generate nonlinear oscillation of microbubbles. The pulse-echo test showed that the -6 dB bandwidth of the 35 MHz transducer is 34.4% and the loop sensitivity is -38.3 dB. The small aperture, dual frequency ultrasound transducers developed in this paper are promising for high resolution ultrasound medical imaging.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianguo Ma, Jianguo Ma, Zhuochen Wang, Zhuochen Wang, Xiaoning Jiang, Xiaoning Jiang, } "Design, fabrication, and test of a small aperture, dual frequency ultrasound transducer", Proc. SPIE 8695, Health Monitoring of Structural and Biological Systems 2013, 86951H (17 April 2013); doi: 10.1117/12.2009716; https://doi.org/10.1117/12.2009716
PROCEEDINGS
7 PAGES


SHARE
Back to Top