18 December 2012 Evaluation of ultra-low expansion spacer in the Fabry-Perot cavity with optical frequency comb
Author Affiliations +
Proceedings Volume 8697, 18th Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics; 86970F (2012) https://doi.org/10.1117/12.2010771
Event: 18th Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2012, Ostravice, Czech Republic
Abstract
The work presents measurements of the length stability of Zerodur glass ceramic with temperature change. Measurement of this thermal characteristic is necessary for determination of the optimal temperature at which the Zerodur glass ceramic has a coefficient of thermal expansion close to zero. The principle of the measurement is to monitor the length changes using an optical resonator with a cavity mirror spacer made from the Zerodur material to be studied. The resonator is placed inside a vacuum chamber with a temperature control. A tunable laser diode is locked to a certain optical mode of the resonator to monitor the optical frequency of this mode. A beat-note signal from optical mixing between the laser and a stabilized femtosecond frequency comb is detected and processed. The temperature dependence of the glass ceramics was determined and analyzed. The resolution of the length measurement of the experimental set-up is on the order of 0.1 nm.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Radek Šmíd, Martin Čížek, Zdeněk Buchta, Josef Lazar, Ondřej Číp, "Evaluation of ultra-low expansion spacer in the Fabry-Perot cavity with optical frequency comb", Proc. SPIE 8697, 18th Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 86970F (18 December 2012); doi: 10.1117/12.2010771; https://doi.org/10.1117/12.2010771
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top