Paper
18 December 2012 The optical power distribution in a dark room
Author Affiliations +
Proceedings Volume 8697, 18th Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics; 86970K (2012) https://doi.org/10.1117/12.2003929
Event: 18th Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2012, Ostravice, Czech Republic
Abstract
Nowadays, in the field of communications systems radio transmission frequencies are dominant inside buildings. Due to the increasing of large number of users and devices, that use these frequencies, there is danger of accruing interferences and reducing the transmission performance. Therefore, indoor wireless optical systems are beginning to use as an alternative solution. Indoor wireless optical systems can use for communication direct and reflected light rays. This article deals with the measurement of optical power distribution in the model dark room. As a light source we use white power LEDs located on the ceiling of the room. The measurement of the optical power distribution was performed in dark room, which was specially constructed for this purpose. This room was also modelled in LightTools software that allows simulate a real measurement. This article compares the results of the measurement and the simulation.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrej Liner, Martin Papes, Jan Vitasek, Petr Koudelka, Jan Látal, Jakub Cubik, and Vladimir Vašinek "The optical power distribution in a dark room", Proc. SPIE 8697, 18th Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 86970K (18 December 2012); https://doi.org/10.1117/12.2003929
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Light sources

Optical testing

Radio optics

Reflection

Photodetectors

Signal to noise ratio

Back to Top