Investigation of cleaning process induced CD shift at EUV mask

Pavel Nesladek; Florian Schunke; Stefan Rümmelin; Kornelia Dittmar

doi:10.1117/12.2027980

28 June 2013 Investigation of cleaning process induced CD shift at EUV mask

Pavel Nesladek, Florian Schunke, Stefan Rümmelin, Kornelia Dittmar

Proceedings Volume 8701, Photomask and Next-Generation Lithography Mask Technology XX; 87010X (2013) https://doi.org/10.1117/12.2027980
Event: Photomask and NGL Mask Technology XX, 2013, Yokohama, Japan

Abstract

EUV lithography is the leading candidate for chip manufacturing at sub 10nm technology node. EUV specifications for mask were derived from those of optical masks and are currently adjusted according to knowledge collected with respect to specific behavior of EUV masks and exposure process. Difference in application of optical and EUV masks - transmission vs. reflection lead to addition of parameters characterizing surface roughness of both capping layer covered multilayer mirror as well as absorber, tight specification of line edge roughness (LER), actinic reflectivity of the mask as well as critical dimension (CD) mean to nominal. Absence of pellicle at EUV masks is expected to result in more frequent cleaning of the mask and hence more pronounced changes of the mask properties due to the mask cleaning process. These assumptions are reflected in tighter specifications for clean process influence. Investigation of the clean process influence on the EUV relevant parameter identifies differences in CD shift between optical and EUV masks. The chemical composition of EUV mask surfaces; absorber and capping layer; not used at optical masks is reason, why change of line width can be observed, and is possibly responsible for differences in CD stability of commercially available EUV absorbers too. Combined with narrowing specifications for CD shift due to cleaning, the material properties may result in the need of material specific clean processes. In our work we investigate the root cause of the differences and check if one process can be used which covers both EUV material stacks at given CD shift specifications.

Citation Download Citation

Pavel Nesladek, Florian Schunke, Stefan Rümmelin, and Kornelia Dittmar "Investigation of cleaning process induced CD shift at EUV mask", Proc. SPIE 8701, Photomask and Next-Generation Lithography Mask Technology XX, 87010X (28 June 2013); https://doi.org/10.1117/12.2027980

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available