4 June 2013 Interferometric tomography metrology of conformal optics
Author Affiliations +
Conformal windows and domes improve aerodynamic quality of missiles and aircraft but introduce significant optical aberrations. These aberrations can be compensated, provided both window and corrective optics are fabricated to high tolerances. Highly accurate measurement of conformal optics is required for success of the fabrication process. This paper describes the development of the Interferometric Tomography – a new tool for metrology of conformal aspheric optics, including optics with very high aberrations. The metrology system is designed to measure wavefront aberrations as well as the optical figure of both surfaces.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mikhail Gutin, Mikhail Gutin, Olga Gutin, Olga Gutin, Xu-Ming Wang, Xu-Ming Wang, Dennis Ehlinger, Dennis Ehlinger, "Interferometric tomography metrology of conformal optics", Proc. SPIE 8708, Window and Dome Technologies and Materials XIII, 870814 (4 June 2013); doi: 10.1117/12.2016475; https://doi.org/10.1117/12.2016475


A new method on measuring radius of curvature of a...
Proceedings of SPIE (September 01 2014)
Advances in interferometric surface measurement
Proceedings of SPIE (December 08 2005)
Interferometric testing for large optical elements
Proceedings of SPIE (October 05 2000)
Aspheric surface testing techniques
Proceedings of SPIE (December 31 1990)
Interferometric metrology of conformal domes
Proceedings of SPIE (July 25 1999)

Back to Top