31 January 2013 In situ chatter suppression in milling machines using microphone
Author Affiliations +
Proceedings Volume 8759, Eighth International Symposium on Precision Engineering Measurement and Instrumentation; 87592G (2013) https://doi.org/10.1117/12.2014420
Event: International Symposium on Precision Engineering Measurement and Instrumentation 2012, 2012, Chengdu, China
Abstract
Chatter suppression in milling machines, using acoustic signals, is examined for preventing poor finishes and for upgrading production quality. The technique of on-line acoustic signal analysis for suppressing chatter has been examined in realistic milling experiments. The natural frequency was determined for end mills, based on finite element analysis, so that beam equations could be used for chatter detection. Frequency domain analysis was employed to monitor the shift in the dominant frequency. In this study, the acoustic chatter signal frequency and resonant peak were applied using a feedback control loop to quantify the acoustic signal and to compensate for spindle speed, respectively.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chao-Ching Ho, Chao-Ching Ho, Jin-Chen Hsu, Jin-Chen Hsu, Chih-Hao Lien, Chih-Hao Lien, Ping-Yen Hsieh, Ping-Yen Hsieh, } "In situ chatter suppression in milling machines using microphone", Proc. SPIE 8759, Eighth International Symposium on Precision Engineering Measurement and Instrumentation, 87592G (31 January 2013); doi: 10.1117/12.2014420; https://doi.org/10.1117/12.2014420
PROCEEDINGS
10 PAGES


SHARE
Back to Top