31 January 2013 Design and adjustment of a near-IR camera system
Author Affiliations +
Proceedings Volume 8759, Eighth International Symposium on Precision Engineering Measurement and Instrumentation; 87593H (2013) https://doi.org/10.1117/12.2014886
Event: International Symposium on Precision Engineering Measurement and Instrumentation 2012, 2012, Chengdu, China
Abstract
In order to achieve a large field of view for a 1.23m large telescope, the design and assembly of a near-IR telescope has been done in this paper. First, an on-axis reflected system was designed based on the optical theory. Secondly, by designing and analyzing the deformation of different support structures for the secondary mirror and the deformation of cylinder type and truss structure, the three-beam secondary mirror support structure and the truss structure were chosen. Last, the adjustment was done by a proper secondary mirror adjusting device and a proper CCD counter-rail. A test was done after the assembly and adjustment, with the result of RMS=0.10618 λ, PV=0.55362 λ(λ=632nm). It is proved that the design of the near-IR system can satisfy the requirements of the optical design and imaging according to the test result.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tingyu Liu, Tingyu Liu, Jingxu Zhang, Jingxu Zhang, Yapeng Li, Yapeng Li, } "Design and adjustment of a near-IR camera system", Proc. SPIE 8759, Eighth International Symposium on Precision Engineering Measurement and Instrumentation, 87593H (31 January 2013); doi: 10.1117/12.2014886; https://doi.org/10.1117/12.2014886
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

IR instrumentation for the ESO VLT
Proceedings of SPIE (October 20 1993)
Status of the LBT interferometer
Proceedings of SPIE (July 28 2008)
Towards infrared DDCA with an imaging function
Proceedings of SPIE (May 20 2011)
A 58 X 62 Pixel Si Ga Array Camera For...
Proceedings of SPIE (April 27 1988)

Back to Top