4 March 2013 Close-range photogrammetry for the modelling of mouldboard plough surfaces
Author Affiliations +
Proceedings Volume 8761, PIAGENG 2013: Image Processing and Photonics for Agricultural Engineering; 87610D (2013) https://doi.org/10.1117/12.2019652
Event: Third International Conference on Photonics and Image in Agriculture Engineering (PIAGENG 2013), 2013, Sanya, China
Abstract
There are the geometric heterogeneity in different shapes of mouldboard ploughs. In order to evaluate the accuracy in measuring the 3D coordinates, and to study the simple mathematical surface which best fits the actual surface of the mouldboard plough, low-cost close-range photogrammetry were used for calculation of the 3D coordinates by co-linearity equation and direct linear transformation, which shoot the two image of 193 targets point marked on the model surface, and carry out binocular stereo matching according to the parallax factor. The results obtained indicate that the surface of a mouldboard plough can be shaped with an accuracy of approximately 1.3 mm, the 3D coordinates of 193 points on the surface of a plough are measured with great accuracy (root mean square 0.66 mm), with the adjustment of a cubic polynomial surface to just 25 control points randomly distributed over the surface of the plough. this surface can be applied to the theoretical analysis of the working process and the manufacture of the mouldboard plough.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianning Yang, Qing Zhou, Qianqian Wang, "Close-range photogrammetry for the modelling of mouldboard plough surfaces", Proc. SPIE 8761, PIAGENG 2013: Image Processing and Photonics for Agricultural Engineering, 87610D (4 March 2013); doi: 10.1117/12.2019652; https://doi.org/10.1117/12.2019652
PROCEEDINGS
4 PAGES


SHARE
Back to Top