Optical actuation of silicon cantilevers: modelling and experimental investigation

Fei Jiang; Adrian Keating; Mariusz Martyuink; Dilusha Silva; Lorenzo Faraone; John M. Dell

doi:10.1117/12.2018431

17 May 2013 Optical actuation of silicon cantilevers: modelling and experimental investigation

Fei Jiang, Adrian Keating, Mariusz Martyuink, Dilusha Silva, Lorenzo Faraone, John M. Dell

Proceedings Volume 8763, Smart Sensors, Actuators, and MEMS VI; 87632K (2013) https://doi.org/10.1117/12.2018431
Event: SPIE Microtechnologies, 2013, Grenoble, France

Abstract

This paper reports on the modeling and experimental investigation of optical excitation of silicon cantilevers. In this work, the silicon cantilevers fabricated have dimensions with width of 15 μm, thickness of 0.26 μm, and variable length from 50 to 120 μm. In order to investigate the effect of the laser modulation frequency and position on the temperature at the anchor edge and displacements at the tip of cantilevers, a transient thermal ANSYS simulation and a steady-state static thermal mechanical ANSYS simulation were undertaken using a structure consisting of silicon device layer, SiO₂ sacrificial layer and silicon substrate. The dynamic properties of silicon cantilevers were undertaken by a series of experiments. The period optical driving signal with controlled modulation amplitude was provided by a 405 nm diode laser with a 2.9 μW/μm₂ laser power and variable frequencies. The laser spot was located through the longitude direction of silicon cantilevers. In factor, simulation results well matched with experimental observation, including: 1) for untreated silicon cantilevers, the maximum of displacement is observed when the laser beam was located half a diameter way from the anchor on the silicon suspended cantilever side; 2) for the both cantilevers, maximum displacement occurs when the optical actuation frequency is equal to the resonant frequency of cantilevers. Understanding the optical excitation on silicon cantilevers, as waveguides, can potentially increase sensing detection sensitivity (ratio of transmission to cantilever deflection).

Citation Download Citation

Fei Jiang, Adrian Keating, Mariusz Martyuink, Dilusha Silva, Lorenzo Faraone, and John M. Dell "Optical actuation of silicon cantilevers: modelling and experimental investigation", Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI, 87632K (17 May 2013); https://doi.org/10.1117/12.2018431

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
14 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Silicon

Semiconductor lasers

Silica

Temperature metrology

Modulation

Thermography

Applied physics

Show All Keywords

Keywords/Phrases

Search In:

Publication Years