Translator Disclaimer
Paper
22 June 2013 An experimental analysis of the real contact area between an electrical contact and a glass plane
Author Affiliations +
Proceedings Volume 8769, International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN2013); 876914 (2013) https://doi.org/10.1117/12.2021355
Event: International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN2013), 2013, Singapore, Singapore
Abstract
The exact contact between two rough surfaces is usually estimated using statistical mathematics and surface analysis before and after contact has occurred. To date the majority of real contact and loaded surfaces has been theoretical or by numerical analyses. A method of analysing real contact area under various loads, by utilizing a con-contact laser surface profiler, allows direct measurement of contact area and deformation in terms of contact force and plane displacement between two surfaces. A laser performs a scan through a transparent flat side supported in a fixed position above the base. A test contact, mounted atop a spring and force sensor, and a screw support which moves into contact with the transparent surface. This paper presents the analysis of real contact area of various surfaces under various loads. The surfaces analysed are a pair of Au coated hemispherical contacts, one is a used Au to Au coated multi-walled carbon nanotubes surface, from a MEMS relay application, the other a new contact surface of the same configuration.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Down, Liudi Jiang, and John W. McBride "An experimental analysis of the real contact area between an electrical contact and a glass plane", Proc. SPIE 8769, International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN2013), 876914 (22 June 2013); https://doi.org/10.1117/12.2021355
PROCEEDINGS
14 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

An MEMS optical fiber pressure sensor fabricated by Au Au...
Proceedings of SPIE (January 10 2018)
Tolerance and precision study for solder self-assembled MEMS
Proceedings of SPIE (September 01 2000)
RF MEMS microswitches design and characterization
Proceedings of SPIE (August 11 2000)
Cargo contraband screening
Proceedings of SPIE (October 06 1994)

Back to Top