8 May 2013 Determination of the uncertainty for phase noise delivered by an optoelectronic based system
Author Affiliations +
Abstract
The aim of this work is to determine the uncertainty on phase noise results obtained by using a double delay line optoelectronic system operating at 1.55 μm wavelength and designed for microwave photonics applications. The use of cross-correlation increases the noise floor of the system. We present how the phase noise is determined and how the global uncertainty of this system is calculated according to the main guideline delivered by the Bureau International des Poids et Mesures (BIPM). Its leads to a global uncertainty better than 2 dB at 2 sigma.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrice Salzenstein, Patrice Salzenstein, Ekaterina Pavlyuchenko, Ekaterina Pavlyuchenko, } "Determination of the uncertainty for phase noise delivered by an optoelectronic based system", Proc. SPIE 8772, Nonlinear Optics and Applications VII, 877217 (8 May 2013); doi: 10.1117/12.2016886; https://doi.org/10.1117/12.2016886
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Low-phase-noise optoelectronic microwave source
Proceedings of SPIE (November 29 2004)
Potentials and challenges for the optoelectronic oscillator
Proceedings of SPIE (February 28 2012)
Opto-electronic oscillator and its applications
Proceedings of SPIE (April 09 1997)

Back to Top