13 March 2013 Pose measurement base on machine vision for the aircraft model in wire-driven parallel suspension system
Author Affiliations +
Abstract
In wind tunnel tests, the pose of the aircraft model in wire-driven parallel suspension system (WDPSS) is determined by driving several wires. Pose measurement is very important for the study of WDPSS. Using machine vision technology, Monocular Vision Measurement System has been constructed to estimate the pose of the aircraft model by applying a camera calibration, by extracting corresponding control points for the aircraft model, and by applying several homogeneous transformations. This article describes the programs of the measurement system, measurement principle and data processing methods which is based on HALCON to achieve the Solution of the pose of aircraft model. Through experiments, practical feasibility of the system is validated.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi-feng Chen, Yi-feng Chen, Liao-ni Wu, Liao-ni Wu, Sui-lu Yue, Sui-lu Yue, Qi Lin, Qi Lin, } "Pose measurement base on machine vision for the aircraft model in wire-driven parallel suspension system", Proc. SPIE 8783, Fifth International Conference on Machine Vision (ICMV 2012): Computer Vision, Image Analysis and Processing, 87831K (13 March 2013); doi: 10.1117/12.2014356; https://doi.org/10.1117/12.2014356
PROCEEDINGS
6 PAGES


SHARE
Back to Top