13 March 2013 Oblique projection approach to generating trajectory along arbitrary direction on NURBS surfaces
Author Affiliations +
Aiming at geometric rules of trajectory generation, the oblique projection approach is proposed to generating trajectories along arbitrary direction to improve reach-ability and provide more choices for 5-axis machining. First of all, a middle plane is constructed with the normal direction at the center point and passing through the center point of the encapsulating box. Secondly, a set of parallel and equidistant lines in the middle plane is constructed as the source object of oblique projection, and the inclination angles of the line set are uniformed as any value in the range of 0 to 2π. Thirdly, oblique projections are employed to produce projection trajectories on the machined surface. Finally, a user function APathGenerator V1.0 is developed in UG NX. The algorithm is robust and provides a feasible way to control direction angle and trajectory gap for the 5-axis machining of any smooth surfaces whether concave, convex or mixed.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xubing Chen, Xubing Chen, Guofan Hu, Guofan Hu, Youlun Xiong, Youlun Xiong, } "Oblique projection approach to generating trajectory along arbitrary direction on NURBS surfaces", Proc. SPIE 8784, Fifth International Conference on Machine Vision (ICMV 2012): Algorithms, Pattern Recognition, and Basic Technologies, 87842D (13 March 2013); doi: 10.1117/12.2021216; https://doi.org/10.1117/12.2021216


C to VHDL compiler
Proceedings of SPIE (September 14 2010)
Integration Of Electro-Optical Sensor Computing Systems
Proceedings of SPIE (June 29 1982)
Signal Reconstruction From Fourier Transform Amplitude
Proceedings of SPIE (March 16 1983)
DFX via the Internet
Proceedings of SPIE (November 20 1995)
2D layout computer-aided system
Proceedings of SPIE (March 21 1996)

Back to Top