18 November 2013 Design and testing under actual condition of performance of an optical voltage measurement transformer for transmission lines electrical of high voltage
Author Affiliations +
Proceedings Volume 8785, 8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications; 87856J (2013) https://doi.org/10.1117/12.2025860
Event: 8th Ibero American Optics Meeting/11th Latin American Meeting on Optics, Lasers, and Applications, 2013, Porto, Portugal
Abstract
In this research paper briefly describes the design and construction of an optical voltage transducer measurement based on the effect electro - optical Pockels. The equipment is designed to operate in electric transmission lines 110 kV AC. It then describes the electrical tests performed on transformer to actual operating conditions. In the design and construction of the optical transformer used a photorefractive crystal Bi4Ge3O20 (BGO), which was used because of its high sensitivity to changes in the electric field as a light source is used a laser diode with a wavelength of 670 nm. Presents the results of performance tests on potential levels appropriate to the optical laboratory. In the second part of this work was subjected to optical transformer operating voltage levels of 110 kV ac in this test the voltage was applied gradually until the operating voltage. Team performance was satisfactory.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nicolas Gomez, Hernan Salazar, Alberto Ciro, "Design and testing under actual condition of performance of an optical voltage measurement transformer for transmission lines electrical of high voltage", Proc. SPIE 8785, 8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications, 87856J (18 November 2013); doi: 10.1117/12.2025860; https://doi.org/10.1117/12.2025860
PROCEEDINGS
6 PAGES


SHARE
Back to Top