13 May 2013 Camera-based curvature measurement of a large incandescent object
Author Affiliations +
Abstract
The goal of this work was to implement a low-cost machine vision system to help the roller operator to estimate the amount of strip camber during the rolling process. The machine vision system composing of a single camera, a standard PC-computer and a LabVIEW written program using straightforward image analysis determines the magnitude and direction of camber and presents the results both in numerical and graphical form on the computer screen. The system was calibrated with LED set-up which was also used to validate the accuracy of the system by mimicking the strip curvatures. The validation showed that the maximum difference between the true and measured values was less than ±4 mm (k=0.95) within the 22 meter long test pattern.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Arttu V. H. Ollikkala, Arttu V. H. Ollikkala, Timo P. Kananen, Timo P. Kananen, Anssi J. Mäkynen, Anssi J. Mäkynen, Markus Holappa, Markus Holappa, } "Camera-based curvature measurement of a large incandescent object", Proc. SPIE 8788, Optical Measurement Systems for Industrial Inspection VIII, 87883D (13 May 2013); doi: 10.1117/12.2020646; https://doi.org/10.1117/12.2020646
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Direct Readout System For Streak Cameras
Proceedings of SPIE (July 26 1979)
Video-camera-based optical bore gauge
Proceedings of SPIE (January 19 1997)
Multiple image reconstitution with lens correction
Proceedings of SPIE (October 02 1995)

Back to Top