Mueller matrix characterization using spectral reflectometry

Dror Shafir; Gilad Barak; Michal Haim Yachini; Matthew Sendelbach; Cornel Bozdog; Shay Wolfling

doi:10.1117/12.2022549

13 May 2013 Mueller matrix characterization using spectral reflectometry

Dror Shafir, Gilad Barak, Michal Haim Yachini, Matthew Sendelbach, Cornel Bozdog, Shay Wolfling

Proceedings Volume 8789, Modeling Aspects in Optical Metrology IV; 878903 (2013) https://doi.org/10.1117/12.2022549
Event: SPIE Optical Metrology 2013, 2013, Munich, Germany

Abstract

The fast evolution of microelectronics fabrication technology demands a concurrent development in metrology capabilities. In recent years, Mueller Matrix (MM) scatterometry has been asserted as a useful tool in characterizing critical dimensions (CD) in periodical arrays of nanometer-size structures. Specifically, some symmetry properties of the measured structure can be readily extracted from the MM, allowing effective isolation of abnormal features. One example is measuring deviations of grating structures from perfect mirror symmetry, characteristic of faults in the fabrication process. The most general form of the Muller matrix requires 16 independent measurements, and requires spectral ellipsometry. However, using some very general assumptions on the reflection properties of the measured sample, one can reduce this number considerably. Such realistic assumptions are time independence of the reflection properties, and homogeneity of the sample (i.e., constant reflectivity throughout the measurement spot), as is the common case in optical CD metrology targets. We show that under these assumptions the Mueller matrix can be completely measured using spectral reflectometry. The goal of characterizing asymmetry is then further analyzed, and a new approach for such measurement, based on spectral reflectometry, is presented. Specifically, using spectral differences metrology (SDM), this approach is shown to provide a simpler means to measure the same asymmetry-dependent quantity as targeted today using MM metrology, but requires only two distinct measurements leading to improved throughput.

Citation Download Citation

Dror Shafir, Gilad Barak, Michal Haim Yachini, Matthew Sendelbach, Cornel Bozdog, and Shay Wolfling "Mueller matrix characterization using spectral reflectometry", Proc. SPIE 8789, Modeling Aspects in Optical Metrology IV, 878903 (13 May 2013); https://doi.org/10.1117/12.2022549

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available