In the working process of chemical oxy-iodigenne laser(COIL), the change of iodine pool pressure is complicated. As a result, it causes some mis-judgements, such as the damage of heater and the leakage of iodine steam. Further more, when the heater electric circuit is in a single working status, and after the heater switch is on or off, there exists a buffer time for the stabilization of iodine pool pressure, which is a relatively long time, and the minimum buffer pressure exceeds to 19 torr . Of course, it increases the preparing time for steady operation of laser, and reduces the quality of laser beam. In this paper, we study the iodine pool pressure of COIL in non-equilibrium condition, and analyze the mutation and the serious buffer phenomenon of iodine steam pressure. At the same time, we design an automatic control system for iodine pool pressure, which consists of five modules, such as data collection, automatic control, manual control, heater electric circuit, and the setting and display of pressure. This system uses two kinds of heater electric circuits, in this way, the serious buffer phenomenon of iodine pool pressure is effectively avoided. As a result, the maximal buffer pressure reduces to 4 torr, this makes sure that the iodine steam pressure is suitable for the operation of COIL, which produces a good condition for the steady operation of laser system and an excellent laser output.