26 September 2013 Fabrication and characterization of nanostructured III-V thermoelectric materials
Author Affiliations +
Approximately two thirds of all fossil fuel used is lost as heat. Thermoelectric materials, which convert heat into electrical energy, may provide a solution to partially recover some of this lost energy. To date, most commercial thermoelectric materials are too inefficient to be a viable option for most waste heat applications. This research proposes to investigate the fabrication and characterization of nanostructured III-V semiconductor thermoelectric materials with the goal of increasing the performance of existing technology. In order to improve thermoelectric material efficiency, either the lattice thermal conductivity must be lowered or the thermoelectric power factor must be increased. This research will focus on the latter by modifying the density of states of the semiconductor material and studying the effect of quantum confinement on the material’s thermoelectric properties. Using focused ion beam milling, nanostructured cantilevers are fabricated from single crystal wafers. An all around gate dielectric and electrode are deposited to create a depletion region along the outer core of the cantilever, thus creating an inner conductive core. The Seebeck coefficient can then be measured as a function of confinement by varying the gate voltage. This technique can be applied to various material systems to investigate the effects of confinement on their thermoelectric properties.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Clint Novotny, Clint Novotny, Fred Sharifi, Fred Sharifi, "Fabrication and characterization of nanostructured III-V thermoelectric materials", Proc. SPIE 8816, Nanoengineering: Fabrication, Properties, Optics, and Devices X, 88160Q (26 September 2013); doi: 10.1117/12.2032673; https://doi.org/10.1117/12.2032673

Back to Top