Paper
18 September 2013 Implementing stray light baffles for improved JWST NIRCam performance
Author Affiliations +
Abstract
The Near Infrared Camera (NIRCam) instrument for NASA's James Webb Space Telescope (JWST) has an optical prescription which terminates at two focal plane arrays for each module. The instrument will operate at 37K after experiencing launch loads at 293K. The focal plane array housings (FPAHs), including stray light baffles (SLBs) must accommodate all associated thermal and mechanical stresses. In addition, the stray light baffles must be installed in situ on the previously assembled flight modules. The main purpose of the FPAH SLBs is to effectively attenuate mission limiting stray light on the focal planes. This paper will provide an overview of the NIRCam stray light baffle design, mechanical and optical analysis, hardware implementation and test results.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul V. Mammini, Tom Birge, Paul Dineen, Craig L. Hom, Michael S. Jacoby, Alison Nordt, and Rob Shivitz "Implementing stray light baffles for improved JWST NIRCam performance", Proc. SPIE 8836, Optomechanical Engineering 2013, 88360T (18 September 2013); https://doi.org/10.1117/12.2024374
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Stray light

Staring arrays

James Webb Space Telescope

Epoxies

Optical fabrication

Computer aided design

Mirrors

RELATED CONTENT

Tracking the surface figure error of the pick off mirror...
Proceedings of SPIE (September 28 2011)
Visualizing stray light
Proceedings of SPIE (August 19 1996)
JWST NIRSpec mechanical design
Proceedings of SPIE (July 23 2008)
JWST NIRCam flight mirror assemblies
Proceedings of SPIE (September 28 2011)

Back to Top