25 September 2013 Ionic polymer metal composite to achieve optical zoom function in a compact camera
Author Affiliations +
Abstract
Nowadays, there are many popular electronic devices consist of optical focus zooming systems. It is the trend to minimize optical systems in portable devices. For this purpose, we used deformable mirrors in optical systems that can make them thinner and lighter. The Ionic-Polymer Metal Composite (IPMC) is the critical component in our design of the deformable mirror. It has good bending feature and can be driven at low voltage (less than 5 volts). The IPMC fabrication processes contain three steps: acid clean, initial compositing process and surface electrode plating process. After the IPMC is completed, we coated the PDMS on the surface to improve the surface roughness. Then we deposit silver on one side as a reflective surface to finish our deformable mirror. Some characteristics of the IPMC deformable mirror would be demonstrated in the paper. By coating the PDMS on the IPMC surface, the surface roughness can be reduced to about 20 nm. The reflection of the silver layer is up to 90%. In our design, we make the reflective optical zoom module which consists of three biconic mirrors and two deformable mirrors. When we applied voltages on deformable mirrors, the reflective light is successfully focused after the deformation of elliptic IPMC. The zoom ratio of this module can be expected to 1.8 times. The deformable mirror can be changed from flat to 65 diopters (m-1) by about 3 volts.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei-Hsiang Chen, Wei-Hsiang Chen, Guo-Dung Su, Guo-Dung Su, } "Ionic polymer metal composite to achieve optical zoom function in a compact camera", Proc. SPIE 8841, Current Developments in Lens Design and Optical Engineering XIV, 88410T (25 September 2013); doi: 10.1117/12.2023482; https://doi.org/10.1117/12.2023482
PROCEEDINGS
8 PAGES


SHARE
Back to Top