Translator Disclaimer
27 September 2013 Status of multi-beam long trace-profiler development
Author Affiliations +
The multi-beam long trace profiler (MB-LTP) is under development at NASA’s Marshall Space Flight Center. The traditional LTPs scans the surface under the test by a single laser beam directly measuring the surface figure slope errors. While capable of exceptional surface slope accuracy, the LTP single beam scanning has slow measuring speed. Metrology efficiency can be increased by replacing the single laser beam with multiple beams that can scan a section of the test surface at a single instance. The increase in speed with such a system would be almost proportional to the number of laser beams. The progress for a multi-beam long trace profiler development is presented.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mikhail V. Gubarev, Daniel J. Merthe, Kiranmayee Kilaru, Thomas Kester, Brian Ramsey, Wayne R. McKinney, Peter Z. Takacs, A. Dahir, and Valeriy V. Yashchuk "Status of multi-beam long trace-profiler development", Proc. SPIE 8848, Advances in X-Ray/EUV Optics and Components VIII, 88480L (27 September 2013);


A long trace profiler with large dynamical range
Proceedings of SPIE (May 13 2013)
Progress of multi-beam long trace-profiler development
Proceedings of SPIE (October 15 2012)
Development of multi-beam long trace profiler
Proceedings of SPIE (October 11 2011)
High-speed interferometric aluminum disk blank tester
Proceedings of SPIE (March 29 1999)
IASI simulation model
Proceedings of SPIE (April 08 2003)

Back to Top