Experimental characterization of deployable outer barrel assemblies for large space telescopes

Peter A. Warren; Mark J. Silver; Benjamin J. Dobson Jr.; Howard A. MacEwen

doi:10.1117/12.2025577

29 October 2013 Experimental characterization of deployable outer barrel assemblies for large space telescopes

Peter A. Warren, Mark J. Silver, Benjamin J. Dobson Jr., Howard A. MacEwen

Proceedings Volume 8860, UV/Optical/IR Space Telescopes and Instruments: Innovative Technologies and Concepts VI; 886008 (2013) https://doi.org/10.1117/12.2025577
Event: SPIE Optical Engineering + Applications, 2013, San Diego, California, United States

Abstract

Several variations of large space-based observatories have been hypothesized using different approaches to deploying the primary and secondary mirrors on orbit. Careful consideration must also be given to the design and implementation of the shield that protects these observatories from thermal extremes, micro-debris, and controls stray light entry into the optical train. One approach to the shield architecture is use of an Optical Barrel Assembly (OBA), such as that used on the Hubble Space Telescope (HST). For space telescopes much larger than the HST, an OBA will need to be deployed or assembled to form an adequately large structure to fully shield both the primary mirror and secondary mirror. This paper describes the design, prototyping, characterization tests, and test results from two different OBA development efforts. The first design is a combined barrel and secondary mirror support structure. This system was designed for a fixed primary mirror and deploys straight upward along the optical axis, carrying the Secondary Mirror Assembly (SMA) with it. The second OBA design is of a structurally independent OBA that deploys out from behind the Primary Mirror Assembly (PMA) (itself deployed or assembled) and extends forward along the optical axis to completely enclose the optical train, pulling along the shroud material. Examples of both systems were built out of prototype materials, tested, and the test results were compared against modeled predictions of system performance. The designs, test procedures, and test results are presented along with recommendations for future work.

Citation Download Citation

Peter A. Warren, Mark J. Silver, Benjamin J. Dobson Jr., and Howard A. MacEwen "Experimental characterization of deployable outer barrel assemblies for large space telescopes", Proc. SPIE 8860, UV/Optical/IR Space Telescopes and Instruments: Innovative Technologies and Concepts VI, 886008 (29 October 2013); https://doi.org/10.1117/12.2025577

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available