19 September 2013 Mechanically induced long period fiber gratings in Er3+ fiber for structural health monitoring
Author Affiliations +
Abstract
This work presents preliminary results on wavelength sensitivity due to mechanically induced long period fiber grating (LPFG) on both standard single-mode and Er-doped fibers. The work presents and compares results for both types of fibers under different torsion conditions. In order to apply the torsion one of the fiber ends is fixed while torsion is applied on the other end. A LPFG whose period is 503μm is used to press on the fiber after the torsion, this will allow for micro curvatures to be formed on the fiber, which will in turn generate a periodical index perturbation on it. Here, it was noted that the rejection band shifts to shorter wavelengths for Er-doped fibers. It was detected that for torsion of 6 turns applied to 10cm doped fiber the wavelength peaks can shift up to 25nm, which is longer than similar results reported on standard fibers. Therefore, by using Er-doped fibers this technique will give more sensitive and accurate results on the real conditions of the structure under study. These results can be employed for sensing applications, especially for small to medium size structures, being these structures mechanical, civil or aeronautical. Theoretical calculations and simulations are employed for experimental results validation.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. G. Pulido-Navarro, M. G. Pulido-Navarro, J. A. Alvarez-Chavez, J. A. Alvarez-Chavez, D. E. Ceballos-Herrera, D. E. Ceballos-Herrera, P. J. Escamilla-Ambrosio, P. J. Escamilla-Ambrosio, } "Mechanically induced long period fiber gratings in Er3+ fiber for structural health monitoring", Proc. SPIE 8868, Infrared Sensors, Devices, and Applications III, 88680O (19 September 2013); doi: 10.1117/12.2023153; https://doi.org/10.1117/12.2023153
PROCEEDINGS
6 PAGES


SHARE
Back to Top