Fabrication of low straylight holographic gratings for space applications

Reinhard Steiner; Alexander Pesch; Lars H. Erdmann; Matthias Burkhardt; Alexandre Gatto; Robert Wipf; Torsten Diehl; H. J. P. Vink; B.G. van den Bosch

doi:10.1117/12.2025269

23 September 2013 Fabrication of low straylight holographic gratings for space applications

Reinhard Steiner; Alexander Pesch; Lars H. Erdmann; Matthias Burkhardt; Alexandre Gatto; Robert Wipf; Torsten Diehl; H. J. P. Vink; B.G. van den Bosch

Author Affiliations +

Proceedings Volume 8870, Imaging Spectrometry XVIII; 88700H (2013) https://doi.org/10.1117/12.2025269
Event: SPIE Optical Engineering + Applications, 2013, San Diego, California, United States

Abstract

The main challenges of fabricating diffraction gratings for use in earth monitoring spectrometers are given by the requirements for low stray light, high diffraction efficiency and a low polarization sensitivity. Furthermore the use in space also requires a high environmental stability of these gratings. We found that holography in combination with ion beam plasma etching provides a way to obtain monolithic, robust fused silica gratings which are able to meet the above mentioned requirements for space applications. Holography accompanied by plasma etching allows the fabrication of a wide range of different grating profiles to optimize the efficiency including the polarization behavior according to a wealth of applications. Typical profile shapes feasible are blazed gratings, sinusoidal profiles and binary profiles and this allows to tailor the efficiency and polarization requirements exactly to the spectral range of the special application. Holographic gratings can be fabricated on plane and also on curved substrates as core components of imaging spectrometers. In this paper we present our grating fabrication flow for the example of plane blazed gratings and we relate the efficiency and stray light measurement results to certain steps of the process. The holographic setup was optimized to minimize stray light and ghosting recorded by the photoresist during the exposure. Low wave front deviations require the use of highly accurate grating substrates and high precision optics in the holographic exposure.

Citation Download Citation

Reinhard Steiner, Reinhard Steiner, Alexander Pesch, Alexander Pesch, Lars H. Erdmann, Lars H. Erdmann, Matthias Burkhardt, Matthias Burkhardt, Alexandre Gatto, Alexandre Gatto, Robert Wipf, Robert Wipf, Torsten Diehl, Torsten Diehl, H. J. P. Vink, H. J. P. Vink, B.G. van den Bosch, B.G. van den Bosch, } "Fabrication of low straylight holographic gratings for space applications", Proc. SPIE 8870, Imaging Spectrometry XVIII, 88700H (23 September 2013); doi: 10.1117/12.2025269; https://doi.org/10.1117/12.2025269

ACCESS THE FULL ARTICLE

PERSONAL SIGN IN
Full access may be available with your subscription

Email or Username Forgot your username?

Password Forgot your password?

Show

Remember Email/Username on this computer

Remember Password

No SPIE account? Create an account
or Institutional Sign In via Shibboleth

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $14.40

Non-members: $18.00 ADD TO CART

Show All Keywords

Keywords/Phrases

Search In:

Publication Years