Paper
24 September 2013 Femtosecond fiber laser based metal blackening
Author Affiliations +
Abstract
In this work, blackening of metals is performed using a commercialized mode-locked femtosecond fiber laser. Different types of surface structures are produced with varying laser scanning conditions (scanning speed and pitch). The modified surface morphologies are characterized using Scan Electron Microscope (SEM) and the blackening effect was investigated both visually and through spectral measurements. Spectral measurements show that the reflectance of the processed materials decreased sharply in a wide wavelength range and varied at different rate for different scanning pitch and speed. Above 95% absorption over the entire visible wavelength range has been demonstrated for the surface structures and the absorption for specific wavelengths can go up to 98.6%. It is found that the enhanced absorption of the black metal is due to light trapping and a variety of micro- and nano-scale surface structures. This study shows the great potential applications such as constructing sensitive detectors and sensors, solar energy absorber and biomedicine. Keywords: Femtosecond laser, fiber laser, blackening, direct writing, nanostructure, light trapping.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Huan Huang, Lih-Mei Yang, and Jian Liu "Femtosecond fiber laser based metal blackening", Proc. SPIE 8876, Nanophotonics and Macrophotonics for Space Environments VII, 88760M (24 September 2013); https://doi.org/10.1117/12.2026244
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Aluminum

Fiber lasers

Metals

Femtosecond phenomena

Scanning electron microscopy

Absorption

Back to Top