1 October 2013 A novel design-based global CDU metrology for 1X nm node logic devices
Author Affiliations +
Abstract
As dimension of device shrinks to 1X nm node, an extreme control of critical dimension uniformity (CDU) of masks becomes one of key techniques for mask and wafer fabrication. For memory devices, a large number of optical techniques have been studied and applied to mask production so far. The advantages of these methods are to eliminate the sampling dependency due to their high throughput, to minimize the local CD errors due to their large field of view (FOV) and to improve the correlation with wafer infield uniformity if they have scanner-like optics. For logic devices, however, CD-SEM has been a single solution to characterize CD performance of logic masks for a long time and simple monitoring patterns, instead of the cell patterns, have been measured to monitor the CD quality of masks. Therefore a global CDU of the mask tends to show its ambiguity because of the limited number of measurement sites and large local CD errors. An application of optical metrology for logic mask is a challenging task because patterns are more complex and random in shape and because there is no guarantee of finding patterns for CDU everywhere on the mask. CDU map still consists of the results from the indirect measurements and the traditional definition of uniformity, a statistical deviation of a typical pattern, seems to be unsuitable for logic CDU. A new definition of CDU is required in order to maximize the coverage area on a mask. In this study, we have focused of the possibility of measuring cell patterns and of using an inspection tool with data base handling capability, KLA Teron617, to find the areas and positions where the repeating patterns exist and the patterns which satisfy a certain set of condition and we have devised a new definition of CDU, which can handle multiple target CDs. Then we have checked the feasibility and validity of our new methodology through evaluation its fundamental performance such as accuracy, repeatability, and correlation with other CD metrology tools with a set of logic masks.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Young-Keun Yoon, Young-Keun Yoon, Dong Hoon Chung, Dong Hoon Chung, Min-Ho Kim, Min-Ho Kim, Jung-Uk Seo, Jung-Uk Seo, Byung-Gook Kim, Byung-Gook Kim, Chan-Uk Jeon, Chan-Uk Jeon, JiUk Hur, JiUk Hur, Wonil Cho, Wonil Cho, Tetsuya Yamamoto, Tetsuya Yamamoto, } "A novel design-based global CDU metrology for 1X nm node logic devices", Proc. SPIE 8880, Photomask Technology 2013, 88801A (1 October 2013); doi: 10.1117/12.2025694; https://doi.org/10.1117/12.2025694
PROCEEDINGS
9 PAGES


SHARE
Back to Top