Paper
1 October 2013 Actinic characterization and modeling of the EUV mask stack
Author Affiliations +
Proceedings Volume 8886, 29th European Mask and Lithography Conference; 88860B (2013) https://doi.org/10.1117/12.2030663
Event: 29th European Mask and Lithography Conference, 2013, Dresden, Germany
Abstract
This paper presents a detailed mask stack modeling based on experimental actinic characterization of the EUV mask stack. A dedicated mask has been fabricated with line/space gratings down to 40nm half-pitch (at mask level, i.e., 10nm at wafer). Using the Advanced Light Source facility at LBNL extensive reflectometry and diffractometry have been performed. The experimental reflectivity results through incidence angle and through EUV wavelength enable us to model both the multilayer definition, as well as the absorber definition in the simulator. The effective performance of the calibrated mask stack in the simulator is validated against the experimental diffractometry results through incidence angle. The presented experimental mask stack characterization and modeling allows a better definition of the mask stack in the simulation tools to enhance their predictive and precompensation power.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vicky Philipsen, Eric Hendrickx, Rik Jonckheere, Natalia Davydova, Timon Fliervoet, and Jens Timo Neumann "Actinic characterization and modeling of the EUV mask stack", Proc. SPIE 8886, 29th European Mask and Lithography Conference, 88860B (1 October 2013); https://doi.org/10.1117/12.2030663
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Reflectivity

Diffraction

3D modeling

Extreme ultraviolet

Silicon

Reflectometry

RELATED CONTENT

EUV mask black border evolution
Proceedings of SPIE (October 08 2014)
Quantitative phase retrieval for EUV photomasks
Proceedings of SPIE (March 23 2020)
Vote taking for EUV lithography a radical approach to...
Proceedings of SPIE (March 24 2017)
A fast approach to model EUV mask 3D and shadowing...
Proceedings of SPIE (April 16 2012)
3D mask modeling for EUV lithography
Proceedings of SPIE (March 23 2012)

Back to Top