1 October 2013 Actinic characterization and modeling of the EUV mask stack
Author Affiliations +
Proceedings Volume 8886, 29th European Mask and Lithography Conference; 88860B (2013) https://doi.org/10.1117/12.2030663
Event: 29th European Mask and Lithography Conference, 2013, Dresden, Germany
Abstract
This paper presents a detailed mask stack modeling based on experimental actinic characterization of the EUV mask stack. A dedicated mask has been fabricated with line/space gratings down to 40nm half-pitch (at mask level, i.e., 10nm at wafer). Using the Advanced Light Source facility at LBNL extensive reflectometry and diffractometry have been performed. The experimental reflectivity results through incidence angle and through EUV wavelength enable us to model both the multilayer definition, as well as the absorber definition in the simulator. The effective performance of the calibrated mask stack in the simulator is validated against the experimental diffractometry results through incidence angle. The presented experimental mask stack characterization and modeling allows a better definition of the mask stack in the simulation tools to enhance their predictive and precompensation power.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vicky Philipsen, Vicky Philipsen, Eric Hendrickx, Eric Hendrickx, Rik Jonckheere, Rik Jonckheere, Natalia Davydova, Natalia Davydova, Timon Fliervoet, Timon Fliervoet, Jens Timo Neumann, Jens Timo Neumann, } "Actinic characterization and modeling of the EUV mask stack", Proc. SPIE 8886, 29th European Mask and Lithography Conference, 88860B (1 October 2013); doi: 10.1117/12.2030663; https://doi.org/10.1117/12.2030663
PROCEEDINGS
12 PAGES


SHARE
Back to Top